Temperature and Humidity Measurement
Temperature and Humidity Measurement
Heat Stress Monitor Calibration
- Range: 32 to 140° F(0 to 60° C) A2LA, -40 to 167° F(-40 to 75° C) NIST, 10 to 90% RH
Heat stress monitors are an important part of workplace safety for demanding industrial job. Having your heat stress monitor calibrated can help prevent accidents or injuries from happening. We simulate the actual temperature and humidity conditions in a controlled climate chamber and use a NIST traceable temperature and humidity probe as a reference standard to ensure the heat stress monitor is performing within specification.
Temperature & Humidity Probe Calibration
- Range: 32 to 140° F(0 to 60° C) A2LA, -40 to 167° F(-40 to 75° C) NIST, 10 to 90% RH
Air quality inside of ductwork is important for a number of factors, air that is too hot or too cold may affect air balance equations or become uncomfortable for people, air that is too humid can cause rust in ductwork leading to premature failure. Having probes calibrated regularly helps ensure these issues don’t arise. We calibrate using a controlled environmental chamber that creates the real temperature and humidity values of the probe being tested, this probe can then be compared to our traceable reference standard to confirm its accuracy.
Moisture Meter
- Range: 0-22% (NIST only)
Moisture meters can detect moisture in a number of surfaces for building quality and finding potential leaks. We can calibrate these meters with a known effective moisture content value for accuracy.
Additional Temperature and Humidity Sensing Equipment
- Range: 32 to 140° F(0 to 60° C) A2LA, -40 to 167° F(-40 to 75° C) NIST, 10 to 90% RH
Many instruments that aren’t designed specifically to measure temperature and humidity still have the sensors to, this is commonly done so that the user knows that they are in the operating range of the device or that measurements might change depending on the ambient temperature and humidity. To ensure the device is properly functioning in its stated range we can test temperature and relative humidity that would fit most workplace environments by using a controlled climate chamber using a sophisticated algorithm to keep temperature and humidity stable and a NIST traceable temperature and humidity probe to verify results.
RTD Thermometers
- Range: 32 to 1202° F (0 to 650° C) NIST only
RTD(Resistance Temperature Detector) thermometers are able to cover a wide range of temperatures due to changes in resistance of the probe, allowing the sensors to be used in basically any application that requires precise temperature monitoring. We calibrate these sensors in a blackbody calibrator that keeps a steady temperature without inaccuracies by absorbing all radiation and our own high accuracy temperature sensor.
IR Thermometer
- Range: Ambient to 1800° F (Ambient to 982° C) NIST only
IR thermometers allow reading high temperature surfaces at a safe distance without risk for injury, used in a variety of professions from HVAC to aerospace. We calibrate these thermometers using a high accuracy, high emissivity OMEGA black body calibrator, testing temperature points across the range of your device.
IR Thermal Camera
- Range: Ambient to 1800° F (Ambient to 982° C) NIST only
IR thermal cameras use a “thermal pixel” display to show temperature differences visibly on a screen, sometimes overlaying an actual display for easier visibility. A color gradient is applied for the temperature range to easily and quickly spot large differences, such as a machine overheating and glowing brightly, or one not glowing at all showing its broken down at some point. By using a high accuracy, high emissivity OMEGA black body calibrator, we can calibrate these cameras for maximum reliability.
Expedited services are available for a fee: 24, 48, or 72-hour rush options. Our standard turnaround time is 7 to 10 business days.
Expedited services are available for a fee: 24, 48, or 72-hour rush options. Our standard turnaround time is 7 to 10 business days.
CIH Equipment
Select your model below to start your service request and create an RMA.
//
Click your model below to start your service request, or view pricing If you don’t see your make or model, give us a call at 1-888-873-2443
Please note: the price ranges listed below reflect the option you choose: Warranty, Evaluation, Standard NIST, NIST with As Found Data or A2LA Accredited 17025 (if applicable).
- 3M Models
- Alnor Models
- Alpha Technics Models
- Amprobe Models
- Beckman Models
- Bendix Models
- Bonvoisin Models
- Calor Models
- Casella Models
- Control Company Models
- Control Models
- Cooper Models
- Curconsa Models
- Cyclops Models
- Davis Models
- Delmhorst Models
- Dickson Models
- Digi-Sense Models
- Dwyer Models
- Ellab
- Extech Models
- Fieldpiece
- Fisher Scientific Models
- Flir Models
- Fluke Models
- GE Models
- General Tools Models
- Heat Stress Models
- Infrared Solutions Models
- Kestrel Models
- MadgeTech Models
- Mannix Models
- Mensor
- Metrosonics Models
- Milwaukee
- Mitchell Instruments Models
- Omega
- Pacer Models
- Quest Models
- Ranco Models
- REED Models
- Restek Models
- Reuter-Stokes Models
- Sensidyne Models
- Shortridge Models
- Sper Scientific Models
- Testo
- TIF Models
- TPI Models
- Traceable Models
- Tramex Models
- TSI Models
- Vaisala Models
- Vista Scientific Models
- VWR Models
Product Calibration Services
Select Your Equipment Model
//-
3M Heat Stress Meter QT-46 Calibration
$0.01 – $791.28 Select options This product has multiple variants. The options may be chosen on the product page -
3M WB-300 Heat Stress Monitor Calibration
$0.01 – $667.68 Select options This product has multiple variants. The options may be chosen on the product page -
Alnor 220 Humidity Probe Calibration
$0.01 – $241.75 Select options This product has multiple variants. The options may be chosen on the product page -
Alnor APM 360 Calibration
$0.01 – $134.09 Select options This product has multiple variants. The options may be chosen on the product page -
Alpha Technics 3000i Digital Thermometer Calibration
$0.01 – $200.63 Select options This product has multiple variants. The options may be chosen on the product page -
Ambient Sling Psychrometer Calibration
$0.01 – $192.92 Select options This product has multiple variants. The options may be chosen on the product page -
Amprobe TH-3 Temp/RH Meter Calibration
$0.01 – $200.63 Select options This product has multiple variants. The options may be chosen on the product page -
Amprobe TR300 Indoor Air Quality Meter Calibration
$0.01 – $200.63 Select options This product has multiple variants. The options may be chosen on the product page -
Atkins 32322-K EconoTemp Plus Calibration
$0.01 – $192.92 Select options This product has multiple variants. The options may be chosen on the product page -
Beckman 210 pH Meter Calibration
$0.01 – $1,315.05 Select options This product has multiple variants. The options may be chosen on the product page -
Bendix Psychrometer 566 Calibration
$0.01 – $192.92 Select options This product has multiple variants. The options may be chosen on the product page -
Bonvoisin GM8903 Anemometer Calibration
$0.01 – $200.63 Select options This product has multiple variants. The options may be chosen on the product page -
BTMETER BT-5000D Anemometer Calibration
$0.01 – $200.63 Select options This product has multiple variants. The options may be chosen on the product page -
Calor Heat Stress Monitor Calibration
$0.01 – $786.08 Select options This product has multiple variants. The options may be chosen on the product page -
Casella Microtherm Calibration
$0.01 – $786.08 Select options This product has multiple variants. The options may be chosen on the product page -
Casella Microtherm WBGT Calibration
$0.01 – $733.46 Select options This product has multiple variants. The options may be chosen on the product page
